Methods of Optical Coupling

An optical coupler is necessary for transferring optical energy into or out of a waveguide. Optical couplers are used for both free-space to waveguide optical energy transmission as well as a transmission from one waveguide to another waveguide, although the methods of coupling for these scenarios are different. Some couplers selectively couple energy to a specific waveguide mode and others are multimode. For the PIC designer, both the coupling efficiency and the mode selectivity are important to consider for optical couplers.

Where the coupling efficiency η is equal to the power transmitted into the waveguide divided by the total incident power, the coupling loss (units: dB) is equal to
L = 10*log(1/η).

Methods of optical coupling include:

  • Direct Focusing
  • End-Butt Coupling
  • Prism Coupling
  • Grating Coupling
  • Tapered Coupling (and Tapered Mode Size Converters)
  • Fiber to Waveguide Butt Coupling

Direct Focusing for Optical Coupling

Direct focusing of a beam to a waveguide using a lens in free space is termed direct focusing. The beam is angled parallel with the waveguide. This is also one type of transverse coupling. This method is generally deemed impractical outside of precision laboratory application. This is also sometimes referred to as end-fire coupling.

End-Butt Coupling

A prime example of end-butt coupling is for a case where a laser is fixated to a waveguide. The waveguide is placed in front of the laser at the light-emitting layer.

Prism Couplers

Prism coupling is used to direct a beam onto a waveguide when the beam is at an oblique incidence. A prism is used to match the phase velocities of the incident beam and the waveguide.

Prism Coupling

Grating Couplers

Similar to the prism coupler, the grating coupler also functions to produce a phase match between a waveguide mode and an oblique incident beam. Gratings perturb the waveguide modes in the region below the grating, producing a set of spatial harmonics. It is through gratings that an incident beam can be coupled into the waveguide with a selective mode.

Grating Coupler in RSoft

Tapered Couplers

Explained in one way, a tapered coupler intentionally disturbs the conditions of total internal reflection by tapering or narrowing the waveguide. Light thereby leaves the waveguide in a predictable manner, based on the tapering of the waveguide.

Tapered Mode Size Converters

Mode size converters exist to transfer light from one waveguide to another with a different cross-sectional dimension.

Butt Coupling

The procedure of placing the waveguide region of a fiber directly to a waveguide is termed butt coupling.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s