Designing a Waveguide Photodetector in Rsoft

The following images depict the first stages of a waveguide photodetector design in Rsoft., The input waveguide is 2 microns, followed by a tapered section to a 10 micron wide photodetector region. Three tapering typologies are used. Following these initial simulations come optimization of the photodetector region and electrical simulations.

First, the layer view. This section is at the input waveguide.

The InGaAs layers above the waveguide serve to absorb the optical power in the photodetector region:

Three different input tapers are used:

Exponential Taper:

Absorption in the photodetector region is in the range of 95%.

Quadratic Taper:

Here is the optical power remaining in the waveguide region:

Linear Taper:

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s